To set up the SNMP Version 3 agent, perform the following steps: Procedure Other message exchanges that occur between the NMS and the SNMP Version 3 agent When the application starts, along with the SilverCreek main window, a console window appears that shows the following information: To run the SilverCreek software, choose Start > All Programs > SilverCreekMx Evaluation > Run Test Suite and Tools (Start Here).
#FREE SNMP WALK TOOL SOFTWARE#
You can download a free version of the software from the following URL: The SilverCreek SNMP test suite enables the detection of SNMP compliance problems and implementation errors in private and standard MIBs. Tatus.1 = INTEGER: up(1) IF-MIB::ifOperStatus.1 = INTEGER: up(1) SilverCreek SNMP Test Suite TrapOID.0 = OID: IF-MIB:: linkUp IF-MIB::ifIndex.1 = INTEGER: 1 IF-MIB::ifAdminS IfAdminStatus.1 = INTEGER: down(2) IF-MIB::ifOperStatus.1 = INTEGER: down(2 TrapOID.0 = OID: IF-MIB:: linkDown IF-MIB::ifIndex.1 = INTEGER: 1 IF-MIB:: The following is sample output from the snmptrap command: 23:52:06 NET-SNMP version 5.1.2 Started. Run the snmptrap command from the ASA to send a linkdown or linkup trap by entering the following commands: This process runs in the foreground, uses only the specified configuration file, and logs messages to the stderr net-snmp]# snmptrapd -f -C -c /tmp/nf -Le Run the snmptrapd command, pointing to that file. In the /tmp/nf file, enter the following statement: createUser -e 80000009fe8949e0b20319e2d175b93fe7dc24af0dff7db915 md5des MD5 mysecretpass If you do not enclose the encryption pass-phrase in quotation marks, it is set to the same value as the authentication Enclose the pass-phrase in quotation marks if it “my privacy pass”-The encryption pass-phrase to use to generate the secret encryption key. Privacy protocol-The encryption type to use (AES or DES, with AES the preferred setting) Enclose the pass-phrase in quotation marks “my authentication pass”-The authentication pass-phrase to use to generate the secret authentication key. Myuser-The USM username that is going to be sending the trapĪuthentication protocol-The authentication type (SHA or MD5, with SHA the preferred setting.) In the /var/net-snmp/nf file, enter the following statement:ĬreateUser -e ENGINEID myuser authentication protocol “my authentication pass” AES “myįor this statement, define the listed parameters, which include the following:ĮNGINEID-The EngineID of the application that is going to be sending the trap To establish this association, perform the following steps: Procedure When the ASA sends a trap, it is authoritative, which means that the user created within the snmptrapd command must be associated with the EngineID sending the trap. SNMPv2-MIB::sysServices.0 = INTEGER: 4 Sending a Trap SNMPv2-MIB::sysLocation.0 = STRING: sjc - 190 W Tasman Drive, San Jose, CA 95134 SNMPv2-MIB::sysContact.0 = STRING: admin admin SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9.1.915 The following is sample output from the snmpwalk command: SNMPv2-MIB::sysDescr.0 = STRING: Cisco Adaptive Security Appliance Version 8.2(0)227 No specific configuration is required for Net-SNMP on Linux when you run the snmpwalk ~]# snmpwalk -v3 -u md5des -l authPriv -a MD5 -A mysecretpass –x des -X To poll a MIB, after you have finished configuring the ASA, run the snmpwalk command from the NMS to the ASA: This section includes the following topics: You can download the Net-SNMP network management tool from the following URL: Tools to request or set information from SNMP agents Net-SNMP Version 5.1.2 provides the following tools and libraries: This chapter describes CiscoWorks and several third-party network management tools, and includes the following sections: Using the Management Station to Device Tool.Getting Started with the CiscoWorks LMS Portal.Using the HP OpenView NNM Web Application.Using the NNM SNMP Version 3 Trap Viewer.Configuring SNMP Version 3 SHA Auth/Priv Connections.Configuring SNMP Version 3 MD5 Auth/Priv Connections.Configuring SNMP Version 3 SHA Auth/No-priv Connections.Configuring SNMP Version 3 MD5 Auth/No-priv Connections.Configuring SNMP Version 3 No-auth/No-Priv Connections.Setting Specific SNMP Version 3 Credentials.Setting Global SNMP Version 3 Credentials.Configuring Specific SNMP Version 3 Parameters.
0 kommentar(er)
